- Deutsch
- English
No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Home
RowErgs There are 159 products.
Subcategories
-
1025: Monitor Arm, Black
This is the part of the indoor rower that connects to the Performance Monitor on one end and the chain guide brackets on the other. For use on all Model C and Model D Indoor Rowers. See more info.
6,00 €In Stock -
1756: Travelling Pulley Assembly
For use with the Model C, D and E Indoor Rowers. This is the 2" x 2" x 3/4" metal traveling pulley assembly with a chain idler pulley included. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the indoor rower on every stroke. One per machine. See more info.
5,50 €In Stock -
1059: Foot Caster, Right
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel.
5,00 €In Stock -
1060: Foot Caster, Left
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel.
5,00 €In Stock -
2953: Fasteners—Model E
For use on the front and rear legs of the Model E Indoor Rower, this is a bag of eight patched fasteners and two unpatched fasteners. Contains two part number 1233 and eight part number 1253. Driver (part number 2230) not included.
4,70 €In Stock -
1103: Monorail Bolt Tube
This tube houses the 5-1/2 inch bolt that holds the monorail hangar assembly together. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. Order two per machine.
4,50 €In Stock -
2230: T27 6-Lobe Driver
T27 6-Lobe driver required to turn the front leg fasteners (part number 2952) on Model C, D (original and updated) and E Indoor Rowers.
4,40 €In Stock -
-
1725: Seat Roller, Bottom
For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Does not include the mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame, because it can usually be reused. If you need the hardware, order part...
3,80 €In Stock -
1154: Lower Die Cast Hanger—Updated Model D, E
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
3,61 €In Stock -
1153: Upper Die Cast Hanger—Updated Model D, E
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
3,50 €In Stock -
-
1501: Footstrap, 24"—For indoor rowers before...
For use with Model A, B, C and original D Indoor Rowers. Replacement nylon footstrap with buckle, approximately 24" long by 1" wide with a screwhole drilled approximately 7" from the buckle end. Two per machine. Sold individually.
3,30 €In Stock -
1517: Footstrap
For use with updated Model D, Model E and Dynamic Indoor Rowers. Replacement nylon footstrap with buckle, approximately 30" long by 1" wide with a screwhole drilled approximately 9" from the buckle end. Two per machine. Sold individually. Model D/E Flexfoot Assembly Diagram
3,30 €In Stock -
1011: Shock Cord Pulley
For use with Model C, D and E Indoor Rowers. This is a 3-3/8 inch diameter pulley that the shock cord (part number 1731) runs over inside the Concept2 Indoor Rower. There are four per machine. Sold individually. See more info.
3,11 €In Stock -
1062: Monorail Bolt Support—Updated Model D, E
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
3,00 €In Stock -
1101: Hanger Shaft, threaded
For use with all Model D and Model E Indoor Rowers manufactured from August 2006–present.
2,90 €In Stock -
1087: Wind Shield
For the Dynamic Indoor Rower only. The clear plastic Wind Shield is designed to deflect air coming from the flywheel away from the rower´s body.
2,90 €In Stock -
2952: Fasteners
For use on the front legs of Model C, D (original and updated) and E Indoor Rowers, this is a bag of eight patched fasteners. If you need to replace missing fasteners on the front leg of your indoor rower, this is what you need. Important: For use only on the front leg of Models C, D, and E Indoor Rowers; not intended for use in other areas of the machine.
2,90 €In Stock -
1024: Chain Idler Pulley
For use with Model C, D and E Indoor Rowers. These are the 1¼" diameter urethane pulleys that the chain runs over inside the indoor rower. There are two per machine: one is part of the traveling pulley (part number 1756); the other is mounted on a stationary axle and has two chain idler spacers (part number 1305) to keep it properly aligned. See more info.
2,70 €In Stock -
124: Wing Nut, Heel Rest—Model A, B
For use with the Model A and B Indoor Rower (Ergometer) only. This screw is part of the heel rest assembly.
2,59 €In Stock -
1041: Mouse—Updated Model D, E
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
2,40 €In Stock -
1130: Axle for Chain Idler Pulley & Shock...
For use on the Model C, D and E Indoor Rower.
2,20 €In Stock -
1044: Foot Cap
For use with Model A, B, C, D, E and Dynamic Indoor Rowers. This is the hard plastic cap that goes on the rear and/or front metal legs of the indoor rower to protect your carpet or floor and keep the machine from sliding back and forth while you row. Two to four per machine, depending on age and indoor rower model. Sold individually. See more info.
2,20 €In Stock -
167: Wooden Handle Grip—Model A, B, C
For use on the wooden handle originally sold on the Model A, B and C Indoor Rower. These are the black foam grips that fit on either end of the handle. Two per handle. Sold individually. Order two to have a pair. See more info.
2,20 €In Stock
