No products
Prices are tax included
Parts listed here are compatible with Model B Indoor Rowers. Model Bs were manufactured from 1986–1993.
For use with Model B Indoor Rowers only. Includes the most common wear and tear parts to keep your Model B in top condition. See more info.
For use with Model A and B Indoor Rowers. Order this kit if you want to upgrade your Model A or B with the style flexfeet standard on new indoor rowers. New flexfeet provide wider range of motion, greater security for the heel, easier adjustability to accommodate a wide range of foot sizes. See more info.
For use with Model B Indoor Rowers. This 10ft long chain comes with a brass swivel at the handle end and chain connectors for the inside end. Fits Model B Indoor Rowers only. If your chain is badly rusted, has seized links or is broken, replace it with this part. See more info.
For use with Model B Indoor Rowers only. This is the 2" x 1-5/8" x 5/8" plastic travelling pulley assembly with gear used to connect the shock cord to the chain. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the rower monorail on every stroke. One per machine. See more info.
For use with the Model A and B Indoor Rower (Ergometer) only.
For use with Model B Indoor Rowers only. Sprockets (gears) for the Model B flywheel axle. Includes both inner (15 tooth) and outer (13 tooth) sprockets. A new chain (part number 280) is also strongly recommended if you are replacing sprockets. The Flywheel Cog Tool Set (part number 484) is required to change sprockets and should be added to your order...
For use with Model A and B Indoor Rowers. This is one of the 2¼" wide seat rollers and its hardware (order a quantity of three per indoor rower) that run on the top and bottom of the stainless steel tube monorail. Includes the seat roller bearings (sealed inside) and includes all of the mounting hardware (nut, bolt, and spacers) that holds it into the...
Replacement handle for the Model D, E and Dynamic Indoor Rowers. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.
For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws and lock washers (four each) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney"...
For use with Model A and B Indoor Rowers. This is one of the 2¼" wide seat rollers that run on the top and bottom of the stainless steel tube monorail. Includes the seat roller bearings (sealed inside). Does not include mounting hardware. If you also need mounting hardware, order part number 378 instead. See more info.
For use with Model B Indoor Rowers only. A bracket and handle hook to retrofit the handle hook on your Model B. If you are planning to upgrade the handle on your Model B Indoor Rower to the handle that is standard on Model D, E and Dynamic Indoor Rowers, we recommend purchasing this part, because the original handle hook on the Model B does not...
For use with the Model A and B Indoor Rower (Ergometer) only. This is the heel rest for the Model A and B Indoor Rower (Ergometer). Includes two screws, washers and wing nuts. See more info.
For use with the Model A, B, updated D, and E Indoor Rowers. These caster wheels fit on your indoor rower´s front foot in place of the molded foot cap enabling easy movement for storage or use in another location.
This is a 50ml bottle of Ballistol universal oil. Recommended for the maintenance of the chains of Concept2 rowing machines.
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel.
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel.
For use with Model C, original Model D and Retrofitted Model A and B Indoor Rowers. This is the 12" molded plastic part anchored with 4 screws and nuts to the metal footplates on the indoor rower, enabling you to adjust the Flexfoot (part number 1063, sold separately) to accommodate different foot sizes and body types. There are two per machine. See more...
For use with Model A and B Indoor Rowers. This chain slide protects the chain as it enters and exits the monorail in the front of the indoor rower.