For use with Model A and B Indoor Rowers. This is one of the 2¼" wide seat rollers that run on the top and bottom of the stainless steel tube monorail. Includes the seat roller bearings (sealed inside). Does not include mounting hardware. If you also need mounting hardware, order part number 378 instead. See more info.
For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...
For use with Model C Indoor Rowers. This is the lever and damper (shutter) on the side of the flywheel housing that slides up and down to change the airflow through the flywheel. Less air through the flywheel (setting = 1) means less drag when rowing; more air through the flywheel (setting = 10) means more drag. Fits Model C Indoor Rowers only. See more...
For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.
For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time (see part number 1916). See more info.
This is the part of the indoor rower that connects to the main box frame on one end and the monitor arm on the other end. This is the right side. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.
This is the part of the indoor rower that connects to the main box frame on one end and the monitor arm on the other end. This is the left side. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. See more info.
For use with the Model C, D and E Indoor Rowers. This is the 2" x 2" x 3/4" metal traveling pulley assembly with a chain idler pulley included. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the indoor rower on every stroke. One per machine. See more info.
For use on the front and rear legs of the Model E Indoor Rower, this is a bag of eight patched fasteners and two unpatched fasteners. Contains two part number 1233 and eight part number 1253. Driver (part number 2230) not included.